ET145-D

Splicing / Seaming Tape

Typical Uses

ET145-S is a class II low permeability vapor seam tape that utilizes a specially engineered cross laminated synthetic film and a thick aggresive co-polymer rubber based adhesive system. ET145-S provides high adhesion, high strength, high puncture resistance, and low permeability with bondabilty to a range of surfaces and conditions including; porous, low energy, cold, and damp surfaces.

Nominal Test Values

Tape Thickness
Adhesion to Stainless Steel
Adhesion to Polyethylene
Adhesion to Concrete Block
WVTR (grams/100in² x 24hrs)
Minimum Application Temperature
Typical Service Temperature

Recommended Storage Conditions: To maintain best performance, pressure sensitive tapes should be stored at a temperature not to exceed 25C, relative humidity less than 50%, and awat from direct sources of heat and sunlight.

The above information is for guidance only and does not represent a guarantee of analysis. It is the ultimate responsability of the end user to evaluate and ensure this product meets any performance requirements fo a specific application.

Standard Shelf Life: 36 months from date of manufacture when stored under recommended storage conditions shown above.

Adhesive Tapes and Cast Films

1-630-636-6722

www.encoattech.com

•Splicing and core tabbing application.
•Field seaming and repair of polyethylene and polypropylene films.
•Applications requiring adhesion to concrete, galvanized aluminum, plywood, oriented strand board, waferboard, and pink foam insulation sheet.
•Applications that require moisture barrier properties.

Nominal Value
13 mils
150 oz/in
90 oz/in
100 oz/in
<0.25
40 F
-10 to 165 F

Test Method
PSTC 133
PSTC 101
PSTC 101
PSTC 101
ASTM D3833